1.The inner wall of the HDPE silicon core tube is a solid, permanent lubricant;

2.The inner silicon core layer of the HDPE silicon core pipe is extruded together with the high-density polyethylene pipe wall and is evenly distributed on the entire pipe inner wall without peeling or detaching. It has the same life as the silicon pipe; the cable can be repeated in the pipe.

3.The inner silicon core layer of the HDPE silicon core pipe has the same physical and mechanical properties as the high-density polyethylene;

4.The friction characteristics of the silicon core layer on the inner wall of the HDPE silicon core pipe remain unchanged, and the cable can be repeatedly extracted in the pipe;

5.The inner silicon core layer of the HDPE silicon core pipe does not react with water, and water can be used to flush the pipe after an accident.

6.Silicon core tube has a small radius of curvature (ten times its outer diameter)

7.The bends and drops encountered during pipe laying can be determined according to the environment and terrain without any treatment.

8.The construction is convenient, and the project cost is greatly reduced: the silicon core tube does not need to be jacketed with a large tube, and the cable can be directly threaded in the pipeline without the need for sub-pipes.

9.Directly buried fiber optic cable casing, with a permanent lubricating lining on the inner wall, with a smaller friction coefficient. The air blowing method is used to lay out the fiber optic cable. The tube is laid quickly. The length of the one-time cable can reach 500 meters to 3000 meters. The joints and manholes along the line The hand hole is reduced accordingly.

10.The tube has 18 kinds of colors could be option, and the tube body can be attached with four marking color.

11.The length of each length or roll silicon core tube can be made by any length as requirement.